MY house build to begin.

Information on building a house, buying poperty and land, and all other general contruction topics...
Post Reply
User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

Re: MY house build to begin.

Post by Barney » June 26, 2015, 6:03 pm

old timer wrote:What's your intention for the dungeon?

Sent from my SM-G920F using Tapatalk
OT
There are 2 rooms down there, 1 for the pool pumps and filters, 2nd for watching large screen TV/ loud music system and drinking. Wouldn't want to upset the neighbor's, that's just my foreigner side coming out ;) . Unfortunately, being Thailand, I am sure some karaoke will happen.
My original thinking was a safe haven room for any trouble, it will be secure.

But there is enough room for a medieval type wall shackle system and you can swing a cat of nine tails for those so inclined. :D Sound proof so you can scream as loud as you like. :shock:



User avatar
old timer
udonmap.com
Posts: 334
Joined: March 31, 2015, 4:10 pm

Re: MY house build to begin.

Post by old timer » June 26, 2015, 8:03 pm

Barney wrote:watching large screen TV/ loud music system and drinking

But there is enough room for a medieval type wall shackle system and you can swing a cat of nine tails for those so inclined. :D Sound proof so you can scream as loud as you like. :shock:
That'll be fantastic when it's finished. Nice little Den to escape to.
Not so sure about getting shackled and whipped though. But you know, OT will try anything.

OT................. \:D/

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 6, 2015, 3:02 pm

Stardate 06072015

Well work is still progressing even though I am away suffering the allah forsaken cold weather of Sydney town. Fair dinkum I will not be coming home to this cold in the near future and especially to retire.
Give me the "when is it going to cool down" city if Udon Thani.

Slab including all outside deck areas has been poured, this consisted of a 50 mm thick preformed slab and then mesh layed for a top coat of another 50 mm concrete to provide a nice level floor ready for the wall frame and roof trusses and then the granite tiling later.
Not sure when I will be back for an inspection.
Attachments
Deck2.jpg
Deck2.jpg (4.98 KiB) Viewed 1694 times
Deck4.jpg
Deck4.jpg (7.32 KiB) Viewed 1694 times
Deck6.jpg
Deck6.jpg (15.06 KiB) Viewed 1694 times
Deck7.jpg
Deck7.jpg (4.45 KiB) Viewed 1694 times
Deck8.jpg
Deck8.jpg (8.27 KiB) Viewed 1694 times
Deck9.jpg
Deck9.jpg (10.4 KiB) Viewed 1694 times

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 19, 2015, 11:41 am

Delivery of the steel house frame and roof trusses has commenced, continue for another few deliveries, had to be broken down to smaller trucks for access to my land, now have 2 guys to mark out concrete deck (first photo) and sort and erect. Main bluscope contractor crew arrive soon from another project.
I am told it has been raining a bit in Nong Samrong so it is slowing works.
Hope by the time I leave Australia tomorrow and get settled in my new work project in China things will be up and running. Hoping for 3 or 4 weeks for the roof to be in place.
Other works are continuing with preparation for pool tiling.
Now have the kitchen 3D modeled, PVC steel windows ordered, all floor and outside deck area tiles ordered. Sparky looking at my requirements, plumber in place, termite guy in place, And the missus helping to project manage. :-"
Attachments
Mark out commences.JPG
!st truck.JPG
Pic 2.jpg
Pic 5.jpg
Pic 6.jpg

User avatar
old timer
udonmap.com
Posts: 334
Joined: March 31, 2015, 4:10 pm

MY house build to begin.

Post by old timer » July 19, 2015, 2:59 pm

Well done Barney, house is coming together nicely.
One thing OT has often wondered is why raise a new house off the ground? Traditionaly I should think it was to avoid the flood waters in your living room.

OT.................. \:D/

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 20, 2015, 4:19 am

old timer wrote:Well done Barney, house is coming together nicely.
One thing OT has often wondered is why raise a new house off the ground? Traditionaly I should think it was to avoid the flood waters in your living room.

OT.................. \:D/

OT,

Just an individual choice, I want access to all services for any future works and maintenance. My design was not complete in my head for where I wanted penetrations to drainage etc. it is high enough to also have the A/C units under the house and out of harms way,
I will be old one day and also needed to keep stair access to a minimum. Hence a single story with the 1 lower room. Can also always crawl up and out of the underground entertainment if the red wine catches me by surprise. :lol: In lieu of falling down the stairs. :-"

bluejets
udonmap.com
Posts: 1059
Joined: March 17, 2008, 10:05 am
Location: Australia

MY house build to begin.

Post by bluejets » July 20, 2015, 5:47 am

Might pay to give a thought to a couple of different types of detectors if you plan to "live" in those underfloor areas.
Such as smoke and gas detectors would be my first thought.
Also perhaps some type of forced ventilation system. :-k
Especially given the new breed of RAC's run on a variant of LPG at around 400-600psi.

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 20, 2015, 2:17 pm

bluejets wrote:Might pay to give a thought to a couple of different types of detectors if you plan to "live" in those underfloor areas.
Such as smoke and gas detectors would be my first thought.
Also perhaps some type of forced ventilation system. :-k
Especially given the new breed of RAC's run on a variant of LPG at around 400-600psi.
Well done =D> and thanks for the thoughts Bluejets,

I will have ventilation in both the filter pump room and entertainment room and also plenty of windows that open, but will look at a detector or warning device down below. Don't want to walk into a dangerous environment. Most of those dangerous gases like CO go down.

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 21, 2015, 6:01 pm

In between showers the frames are being fabricated, erected and bolted into the concrete floor.
Front of house frames are in and the side has started as in photos.
Plenty of glass with big doors and windows in my design can be seen.
Work should progress rapidly with wall frames and then with the roof trusses and sheeting arriving next shipment.
Attachments
Frame3.JPG
Frame2.JPG
Frame1.JPG

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 24, 2015, 12:18 pm

Have our design of the kitchen in 3D all but done by the supplier.
Just some detail to complete with the type of appliances used and which wall tiling and stainless steel splash backing in different places.
Plenty of large windows and doors for an open feeling and looking out to the pool deck.
Got the wine fridge in though. :D
Kitchen is 5mtr x 5 mtr
Attachments
2.2 Tbv.JPG
2.3 Fr-Sink.JPG
2.2 Ins-Counter bv.JPG
2.2 Fr-Serv.JPG
2.2 Counter R.JPG

User avatar
wazza
udonmap.com
Posts: 9053
Joined: April 2, 2006, 9:06 pm
Location: Cuba- Drove around in an Ol 55 Chev - On the Prowl
Contact:

MY house build to begin.

Post by wazza » July 24, 2015, 1:21 pm

Barney for my kitchen i used international plug sockets as I had some older appliances from home i still use ...

Got a water outlet for the fridge ?

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 25, 2015, 7:46 am

wazza wrote:Barney for my kitchen i used international plug sockets as I had some older appliances from home i still use ...

Got a water outlet for the fridge ?
All my old aussie appliances went with the divorce property settlement. New life new appliances. :D

Will run a small line through the cupboards from the water filter to the fridge. May have to run it adjacent to the gas line for the cooktop.

User avatar
noosard
udonmap.com
Posts: 4077
Joined: April 17, 2011, 4:07 am
Location: Ban Jumpa Udon
Contact:

MY house build to begin.

Post by noosard » July 25, 2015, 8:42 am

Barney I have suggest for you
On your wall cupboards I would take them all the way to the ceiling
Even if it is just finished with a false wall

Had to do that here as the top of the cupboards never got cleaned and there was nearly a garden growing after 2 years

User avatar
wazza
udonmap.com
Posts: 9053
Joined: April 2, 2006, 9:06 pm
Location: Cuba- Drove around in an Ol 55 Chev - On the Prowl
Contact:

MY house build to begin.

Post by wazza » July 25, 2015, 8:47 am

Barney wrote:
wazza wrote:Barney for my kitchen i used international plug sockets as I had some older appliances from home i still use ...

Got a water outlet for the fridge ?
All my old aussie appliances went with the divorce property settlement. New life new appliances. :D

Will run a small line through the cupboards from the water filter to the fridge. May have to run it adjacent to the gas line for the cooktop.
Samsung fridges with ice and water outlets have their own 1 micron filters inside. Simple screw in and out.

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 30, 2015, 9:31 am

Stardate 30072015

Well just shy of 4 months now and things have certainly progressed. Small delays for weather. Has been a smooth ride sp far and with me being away on work assignemnts it has been a less stressful time for the lady of the house.
Following shots are the completion of wall frames and now getting the roof trusses together on the ground ready for the final assault when the larger roofing crew arrives soon, to install the roof trusses and the large amount of Bluscopesteel thermotech roof sheeting. Maybe 2 to 3 weeks for the roof. That will make a dry undercover area for the plumber , electrician. tilers and wall placement people for both outer and inner walls. Will take a deep breath and step back once the roof is on the then check the final detail of fit out in my head so that it goes to plan.
Attachments
Main Bedroom.jpg
Main bedroom glass door opening to deck
P3.jpg
Over pool to deck and 2 main bedrooms, main steel members and 1 column to support the roof over deck to pool edge
Pool deck to house view.jpg
Looking over pool to house
P4.jpg
Roof truss2
P5.jpg
Roof Truss1

User avatar
wazza
udonmap.com
Posts: 9053
Joined: April 2, 2006, 9:06 pm
Location: Cuba- Drove around in an Ol 55 Chev - On the Prowl
Contact:

MY house build to begin.

Post by wazza » July 30, 2015, 9:34 am

Stupid Question and I had to add some to my place.

Guttering ...

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 30, 2015, 10:50 am

wazza wrote:Stupid Question and I had to add some to my place.

Guttering ...
Wazza
Good question
Minimal guttering, will eventually have some around the pool and deck area
None elsewhere.
I have tried to put some thought into it as it is a large surface area roof and I have designed a drainage system around the house for storm water from the roof to go via surface spoon type drains on both side concrete walkways. They will eventually transfer into underground piping to a 10,000 ltr underground DOS tank. Once full there will be a manual 3 way type valve to drain any excess overflow via another underground pipe out to a concrete culvert now being installed by the govt for the new road around the water resources lake expansion, at the back of the property. Filter systems to stop debris will be in place. The valve will allow water to by-pass the tank in the normal position and once significant rain has fallen and a lot of small dirt particles have gone past I can turn the valve to fill the tank.

User avatar
Aardvark
udonmap.com
Posts: 5838
Joined: March 5, 2007, 9:08 am
Location: Perth Australia and Udon

MY house build to begin.

Post by Aardvark » July 30, 2015, 4:26 pm

Looks like you've had your thinking cap on Barney, good for you ....

User avatar
Barney
udonmap.com
Posts: 4541
Joined: November 1, 2012, 5:51 am
Location: Outback of Nong Samrong Udon Thani

MY house build to begin.

Post by Barney » July 30, 2015, 8:19 pm

noosard wrote:Barney I have suggest for you
On your wall cupboards I would take them all the way to the ceiling
Even if it is just finished with a false wall

Had to do that here as the top of the cupboards never got cleaned and there was nearly a garden growing after 2 years
Sorry Noosard missed your post. It is a good point and will look later. Unfortunately my ceilings are slightly higher at a full 3 meters. Have had to extend the exhaust hood already. Will look at retro fit and if it makes the cupboards look out of place by extending up.

User avatar
fatbob
udonmap.com
Posts: 2266
Joined: July 14, 2009, 7:19 pm

MY house build to begin.

Post by fatbob » July 30, 2015, 8:38 pm

Noosard is dead right, make a gypsum bulk head and delete the void above your o'head cabinets.

Post Reply

Return to “House & Land”