Gas Bottle Manifold and or Brass Fittings

Post Reply
User avatar
pipoz4444
udonmap.com
Posts: 2188
Joined: April 8, 2011, 1:33 am
Location: All Over the Place

Gas Bottle Manifold and or Brass Fittings

Post by pipoz4444 » June 2, 2018, 12:27 pm

Hi am looking for (where to buy) a simple 2 or 3 Bottle Kitchen Gas Manifold and or the Brass Fittings to make one

I intend to have the two or three Gas bottles outside of the Kitchen, then connect them into a simple outside Manifold with Valve arrangement, then pipe it from the Manifold into the Kitchen. I will probably have an On/Off Valve at each Gas Bottle connection and then one other main valve in the Line just before the Line runs through the Kitchen wall

Does anyone know where I might be able to buy (in Udon Thani) the Manifold or the Brass Fittings to make one up.

Something close to the attached example pictures, but not as complicated as them (just grabbed these off the web)

pipoz4444
Example No 2 - Gas Bottle Manifold.jpg
Example No 2 - Gas Bottle Manifold
Attachments
Example No 1 - Gas Bottle Manifold.jpg
Example No 1 - Gas Bottle Manifold


That's one small step for a man, one giant leap for mankind.

User avatar
sometimewoodworker
udonmap.com
Posts: 3470
Joined: October 7, 2008, 11:19 am

Re: Gas Bottle Manifold and or Brass Fittings

Post by sometimewoodworker » June 2, 2018, 1:02 pm

I've found that ToolPro is the place to go to for many different kinds of fittings, you will almost certainly have to get a regulator for each gas bottle, I recommend getting the type with a reset button as they are probably safer.
Jerome and Nui's new househttp://bit.ly/NJnewHouse
In my posts all fees and requirements are the standard R&R but TIT and a brown envelope can make incredible changes YMMV.

User avatar
parrot
udonmap.com
Posts: 10925
Joined: March 19, 2006, 8:32 pm

Re: Gas Bottle Manifold and or Brass Fittings

Post by parrot » June 2, 2018, 1:56 pm

I'd be surprised if you can find it in brass.....but if I was looking for such a thing, I'd go to the corner store, just past and across from Ngeesoon (on Phosri Rd). It's at the intersection just before you come to Tungsrimeuang.....marked in red on the attachment.
The store caters to 'all things gas'
Attachments
Capture.JPG

User avatar
papafarang
udonmap.com
Posts: 4333
Joined: August 2, 2013, 10:14 am

Re: Gas Bottle Manifold and or Brass Fittings

Post by papafarang » June 2, 2018, 1:59 pm

their called song serm,if they don't have it , well it don't exist
Costa del kutchap. Tel 0981657001
Near CH99+V49, 2263, Tambon Mueang Phia, Amphoe Kut Chap, Chang Wat Udon Thani 41250

User avatar
deankham
udonmap.com
Posts: 1428
Joined: March 17, 2008, 5:24 am
Location: Alseep under the tree

Re: Gas Bottle Manifold and or Brass Fittings

Post by deankham » June 2, 2018, 3:35 pm

Hi p4444,

Sorry for answering your question with a question but what are you trying to achieve with this set-up?

Are you just sick of changing the gas bottles too regularly? Is so you can get the bigger 5foot tall gas bottles.

User avatar
papafarang
udonmap.com
Posts: 4333
Joined: August 2, 2013, 10:14 am

Re: Gas Bottle Manifold and or Brass Fittings

Post by papafarang » June 2, 2018, 4:35 pm

deankham wrote:
June 2, 2018, 3:35 pm
Hi p4444,

Sorry for answering your question with a question but what are you trying to achieve with this set-up?

Are you just sick of changing the gas bottles too regularly? Is so you can get the bigger 5foot tall gas bottles.
yeh and he can have 3 5ft bottles lasting years :D
Costa del kutchap. Tel 0981657001
Near CH99+V49, 2263, Tambon Mueang Phia, Amphoe Kut Chap, Chang Wat Udon Thani 41250

harry68
udonmap.com
Posts: 336
Joined: June 3, 2012, 7:37 am

Re: Gas Bottle Manifold and or Brass Fittings

Post by harry68 » June 3, 2018, 6:07 am

I would contact Doc from quick fire bbq's
he maybe able to make it up for you

User avatar
pipoz4444
udonmap.com
Posts: 2188
Joined: April 8, 2011, 1:33 am
Location: All Over the Place

Re: Gas Bottle Manifold and or Brass Fittings

Post by pipoz4444 » June 3, 2018, 3:43 pm

Thank you Gentlemen and others for the replies. =D> Well received and appreciated

regards

pipoz4444
That's one small step for a man, one giant leap for mankind.

User avatar
pipoz4444
udonmap.com
Posts: 2188
Joined: April 8, 2011, 1:33 am
Location: All Over the Place

Re: Gas Bottle Manifold and or Brass Fittings

Post by pipoz4444 » June 3, 2018, 3:45 pm

papafarang wrote:
June 2, 2018, 1:59 pm
their called song serm,if they don't have it , well it don't exist
Thanks papafarang and any general idea where Song Serm are

pipoz4444
That's one small step for a man, one giant leap for mankind.

User avatar
pipoz4444
udonmap.com
Posts: 2188
Joined: April 8, 2011, 1:33 am
Location: All Over the Place

Re: Gas Bottle Manifold and or Brass Fittings

Post by pipoz4444 » June 3, 2018, 3:48 pm

sometimewoodworker wrote:
June 2, 2018, 1:02 pm
I've found that ToolPro is the place to go to for many different kinds of fittings, you will almost certainly have to get a regulator for each gas bottle, I recommend getting the type with a reset button as they are probably safer.
Thanks sometimewoodworker and yes had them on my list of places to visit. Just have to work how how to reach their car park, now that the Contractor has dug up most of the road in front of them

pipoz4444
That's one small step for a man, one giant leap for mankind.

User avatar
pipoz4444
udonmap.com
Posts: 2188
Joined: April 8, 2011, 1:33 am
Location: All Over the Place

Re: Gas Bottle Manifold and or Brass Fittings

Post by pipoz4444 » June 3, 2018, 4:00 pm

deankham wrote:
June 2, 2018, 3:35 pm
Hi p4444,

Sorry for answering your question with a question but what are you trying to achieve with this set-up?

Are you just sick of changing the gas bottles too regularly? Is so you can get the bigger 5foot tall gas bottles.
Good question as I wasn't sure myself at some point.

The intent was to have two normal size smaller gas bottles connected at all time - each one will serve its own Cook top inside the kitchen, as I have two separate Cook tops. Then have a third larger gas bottle connected as a spare supply, but only using it if one of the smaller gas bottles runs out and cannot be refilled for 2 -3 days, for whatever reason.

All gas bottle to be on the outside wall, outside of the kitchen cooking area

The thought was that, in the event that one or both of the two normal size gas bottles run out, then I can quickly just turn a valve so that the larger gas bottle feeds into one or two of the supply lines to the cook tops. Then a day to two later after I refill the smaller gas bottle, I can turn off that valve for the larger bottle and simply reconnect the new smaller bottle. The larger bottle is just a backup that may need to be refilled only every 6 - 12 months - If than make sense??

Regards

pipoz4444
That's one small step for a man, one giant leap for mankind.

User avatar
pipoz4444
udonmap.com
Posts: 2188
Joined: April 8, 2011, 1:33 am
Location: All Over the Place

Re: Gas Bottle Manifold and or Brass Fittings

Post by pipoz4444 » June 3, 2018, 4:05 pm

pipoz4444 wrote:
June 3, 2018, 3:45 pm
papafarang wrote:
June 2, 2018, 1:59 pm
their called song serm,if they don't have it , well it don't exist
Thanks papafarang and any general idea where Song Serm are

pipoz4444
Thanks understand now, you were referring to parrot's Map.

Regards

pipoz444
That's one small step for a man, one giant leap for mankind.

Post Reply

Return to “I'm Looking For....”